Description
The TBT Automatic Ring and Ball Tester allows fully automatic testing of softening point determination of asphalt binders to Australian and International Standards.
Two laser sensors detect the fall of the balls, calculating and recording the softening point of the test material.
The keypad allows for easy setup of the parameters and execution of the test. The bath temperature is measured by an electronic system maintaining the gradient (5°C/min) as specified by the standards. Provides real-time display of the temperature and time for the entire test. A magnetic stirrer ensures a uniform temperature in the bath during the complete test.
Export data to a PC via serial cable.
Supplied complete with two rings, two steel balls, two centring devices, support frame, 600ml beaker, temperature probe, printer roll, serial cable.
Main Features
- Heating rate accuracy 5±0.5℃/min
- Good temperature uniformity via magnetic stirring
- Fully automatic measurement and record test data
- Temperature correction and temperature compensation parameters are set to ensure that the temperature display is consistent with the temperature measurement of the thermometer during the heating process
- It can be used for softening point detection in both low and high temperature sections
- Built in printer for printing test report
Specifications
| Heating rate | 5±0.5 °C/min |
| Heating power | 1kW |
| Ambient temperature & RH | 5-35°C, ≤80% |
| Temperature range | 5-180°C |
| Power supply voltage | 220V, 50Hz |
| Rated total power | 0.8kW |
| Dimensions | 360×370×560mm |
Ordering Information
| 81-PV0144.TBT | Automatic Ring and Ball Tester |
