Description
A bench mounted compression frame with motor and worm gear housed within the base unit. A limit switch is provided for the bottom limit of travel. The machine is supplied complete with load ring, 30 kN cap., incorporating stem brake feature to hold the maximum reading. For testing 6” dia. (152.4 mm) specimens, the 82-T1009/F load ring should be used instead of the 30 kN fit on the machine. All the load rings are provided with 0.001mm high resolution dial gauge, assuring a strict conformity to the standards. See accessories.
The stability mould and flow meter have to be ordered separately. See accessories.
Other testing machines are available to perform the Marshall stability test, conforming to either ASTM/AASHTO or EN standards.
Technical Specs
- capacity: 50 kN
- Load ring cap.: 30 kN (50 kN using the 82-T1009/F load ring. See accessories).
- Platen speed: 50.8 mm/min
- Power rating: 736 W
- Overall dimensions (hxlxd): 1028x392x560 mm
- Weight approx.: 85 kg
Accessories
Accessories to complete the 76-B0030 frame only
34-T0104/10
Compression device. To fit the load ring to press the stability mould
Configuration 1
82-T1007/F
Load ring, 30 kN cap., fitted with gauge 0.001 mm res., complete with stem brake feature to hold the maximum reading.
82-T1009/F
Load ring, 50 kN cap., fitted with gauge 0.001 mm res., complete with stem brake feature to hold the maximum reading. (As alternative to 30 kN model)
Alternative configuration
82-T1007/FC
Load ring, 30 kN cap., fitted with gauge 0.01 mm res., complete with stem brake feature to hold the maximum reading.
82-T1009/FC
Load ring, 50 kN cap., fitted with gauge 0.01 mm res., complete with stem brake feature to hold the maximum reading. (As alternative to 30 kN model)
Accessories common to both configuration above
76-B0033/4
Stability mould for 4” dia. (101.6 mm) specimens
76-B0033/6
Stability mould for 6” dia. (152.4 mm) specimens to ASTM D5581
76-B0034
Flow meter
76-B0031/2
Stability mould cast aluminium, open type