Description
These are the brains of the AUTOTRIAX 2 system, transmitting data and information between the software and all the active components such as the pressure controllers and Tritech triaxial load frame. The units are produced in four different versions (see below) to offer maximum flexibility. They can be stacked vertically, making them very space-efficient, and power connectors of multiple units can be daisy-chained together, allowing them all to be run from a single mains socket. Transducer calibrations are saved directly in the firmware of the units.
29-WFD1A2
AUTOTRIAX 2 Data acquisition and control unit: Master unit
Consisting of 12 channels configured as follows:
– 4 reading and control active channels for vertical load, displacement, cell and back pressur
– 8 reading channels for pore pressure and any other additional transducers, including on-sample, TRITECH compression frame, HYDROMATIC 2 pressure/volume controllers and solenoid valves are also connected to the unit. 110-240 V, 50-60 Hz, 1 ph
29-WFD0A3
AUTOTRIAX-2 Data acquisition and control unit: Triple pressure extension unit
It is used in addition to a Master Unit for providing control of three extra pressure systems,
It may connect up to:
– 3 pressure transducers;
– 3 solenoid valves;
– 3 HYDROMATIC-2 pressure/volume controllers;
-9 free channels for data acquisition;
110-240 V, 50-60 Hz, 1 ph
29-WFD0A1
AUTOTRIAX 2 Data acquisition and control unit: Pressure extension unit
It is used in addition to a Master Unit for controlling of one additional pressure system,
It may connect up to:
– 1 pressure transducer;
– 1 solenoid valve;
– 1 HYDROMATIC 2 pressure/volume controller
– 3 free channels for data acquisition
110-240 V, 50-60 Hz, 1 ph
29-WFD0A1/UNS
AUTOTRIAX 2 Data acquisition and control unit: Air pressure extension unit for unsaturated test
Used in addition to a Master Unit for controlling one additional air pressure system and one Automatic Volume Change device, suitable for unsaturated tests.
110-240 V, 50-60 Hz, 1ph
Technical Specs
- Analogue/digital converter: 16-bit
- Additional transducer gain ranges: +/- 20 mV and +/-10 V
- Ethernet connection to PC: 100 Mb
- Dimensions: WFD1A2 or WFD0A3: W330 x D240 x H144 mm, WFD0A1 or WFD0A1/UNS W330 x D240 x H70 mm
- Weight: 5kg
- Power supply: 110-240 V 50/60 Hz, 1 ph
Accessories
29-WF4645/COMP
High specification desktop PC with LCD monitor. Operating system MS Windows pre-installed, 8 port LAN HUB converter for AUTOTRIAX 2 connection. 110-240V/50-60 Hz/ 1ph
