Description
The AUTOTRIAX 2 is an advanced triaxial testing system that can automatically perform up to 6 entire and independent tests at the same time, from start to finish, without any human intervention.
The closed-loop feedback control system monitors the components status continuously, in order to react to any change in the parameter pre-set at each test stage.
Autotriax 2 can perform different kind of triaxial tests, :
- Total and effective stress tests UU (unconsolidated undrained), CU (consolidated undrained) and CD (consolidated drained) isotropic conditions according to ASTM and BS Standards;
- Stress path tests following MIT and Cambridge methods;
- K0 anisotropic volume controlled tests;
- Permeability tests in triaxial cells according to BS 1377: 6;
- Unsaturated soil triaxial test with control of matric suction using the axis translation method.
Also, additional software package available on request for performing:
- CRS – Constant Rate of Strain
- Hydraulic consolidation
- Unconfined compression
- CBR (California Bearing Ratio)
A typical PC controlled fully automatic triaxial configuration includes:
Load frame
TRITECH 50 kN or 100 kN: TRITECH original high-performance load frames for triaxial tests, ideal solution for advanced and research laboratories that want to perform high quality tests at high productivity levels, directly managed by data acquisition and control unit.
Triaxial cell with accessories:
The proper model can be selected from our range (see triaxial load frame TRITECH and triaxial cells for advanced applications or double wall triaxial cells required for unsaturated tests) or, as alternative, existing machines can be used.
Data acquisition and control unit
Data acquisition and control unit transmitting data and information between the software and all the active components, such as pressure controllers and Tritech triaxial load frame.
Pressure/volume controller
Four models are available depending on: max pressure capacity (3500 or 1700 kPa) and number of pressure lines (one or two).
Triaxial test automatic control and processing software.
The AUTOTRIAX 2 software is a comprehensive and user-friendly interface between the operator and the testing system.
The Autotriax 2 configurations can be extended and expanded in subsequent steps, in order to control further tests adding proper components. These operations can be easily made on site just configuring the user-friendly software, as a plug-and-play system.
Technical Specs
- Maximum no. of simultaneous tests: 6
- Maximum no. of channels: 96 (in the most extended configuration)
- Capacity: 50 kN and 100 kN
- Speed range: 0.00001 – 99.99999 mm/min
- Specimen range: 38,50,70,100,150 mm diameter
- Water working pressure: 1700 or 3500 kPa
- Pressure resolution: 0.1 kPa
- Maximum capacity of pressure / volume controller: 250 cc
- Volume resolution: 0.001 cc
- Effective resolution: 131000 points
- LAN communication
Accessories
LOAD FRAME
Triaxial load frame TRITECH
TRIAXIAL CELL
Triaxial cells for advanced applications
MEASURING SYSTEM
Data acquisition and control unit
Data acquisition and control unit for triaxial tests – AUTOTRIAX 2
Load
External load cells or Submersible load cells
Displacement
Axial strain displacement transducers
Pore pressure
Pressure transducers for triaxial test
PRESSURE SYSTEM
Pressure and volume controller for triaxial tests – AUTOTRIAX 2
SOFTWARE
Triaxial test automatic control and processing softwares – AUTOTRIAX 2
DE-AIRING WATER SYSTEM
Complete de-airing water system